The charger itself is a smart charger, meaning that the charger automatically charges and cuts off when the battery is full. Some cheaper low-end chargers do not support this meaning you have to work out how long to charge for, with this charger you can plug it in and not have to worry about when the battery is full, as the charger will cut off the power supply when it is full to prevent any damage to the batteries.

This charger is not your everyday charger, it is an Airsoft battery charger, but with a difference. It's not just a standard charger with a blinking LED, it also features a LED 7 segment display which shows digitally what type of battery you're charging, as well as the amount of charge remaining.

The charger itself charges Airsoft standard LiPo and NiMh battery, as well as other rarer types such as LiFe and NiCd batteries. What this charger does is also charge Lithium High Voltage batteries, also known as LiHV, which are used in RC Cars and Vehicles. This means that if you're hobby cross you can use the one charger for both. The charger supports 2-4 cell LiPo, LiFe, and LiHV batteries, and 4-8 cell NiMh and NiCd batteries.

The charger comes packaged with all the additional cables required to charge all your Airsoft batteries. As standard, the charging cable bundled has an upgraded Dean's connector allowing you to charge upgraded batteries and comes with an adaptor to convert deans to mini-Tamiya in order to change more standard batteries. The side of the battery charger also features data ports used for plugging in LiPo, LiFe, and LiHV batteries for balance charging.

The charger itself is designed to work with standard UK plug sockets and works on a 100v - 240v AC input at 50 / 60hz, meaning it should work in almost all homes in the UK. The charger outputs a maximum charge power of 30W and adjusts itself to what the battery requires in order to safely charge the battery without causing any damage.

This charger is perfect for any Airsoft skirmisher who is looking to get into Airsoft and needs a top-quality charger, or even for those who are regular skirmishers and are looking to replace their charger with a better and high-quality version.

Features

• Created by NUPROL as part of their POWER range
• Intelligent Auto-Stop charger
• Charges almost every type of Airsoft battery
• Charges Li-Po, Li-Fe, Li-Hv, Ni-MH, and Ni-Cd Batteries 
• Smart charging system to detect problems safely
• Stops charging when the battery is full
• LED Text Display and LED info light
• Internal power supply system

• Comes with a charging harness and connector adaptor
• Can be used with LiPo data connectors for Balance Charge
• The standard cable includes Deans connector
• Comes with Deans to Mini-Tamiya Converter
• Adjustable AMP output setting
• AMP adjustable to 0.5A - 4A in 0.5A increments
• 100v - 240v AC Input voltage
• Outputs a max of 30W

Package Includes

• Multi-Function NiMh / LiPo / LiFe Charger
• Charging Harness to Deans Connector
• Deans to Mini-Tamiya Converter
• Power Cable

Special Instructions

• Please ensure that when charging the battery you always do so in a fire-safe environment, such as in a battery charging back.
• Do not charge any damaged batteries, as this can lead to further damage. Examples of this are Swollen / puffy batteries, damaged wires, or fully discharged batteries.
• Ensure the charger is on the correct setting before beginning the charge cycle.
• Do not change the battery charge type while the battery is charging.

INSTRUCTIONS

1. Power on the AC Power supply
2. The charger is ready when the led in the middle flashes blue
3. Choose the right battery type by holding in the button until it changes
4. Adjust the Amperage to the correct setting (Chose the value closest below the Amperage of the battery, so for 1200mAh chose 1A, etc)
5. Connect the main connector to the front of the charger. If the battery is a Li-Po, Li-Fe or Li-Hv then also connect it to the side data ports
6. When charging begins the central LED will turn red. The digital display will show the percentage of charge on LiPo, LiFe and Li-Hv. The digital display will show the total voltage when you are charging Ni-Mh or Ni-Cd battery.
7. When the battery is full the LED will turn purple
8. Once the battery is removed the led will return to flashing blue when it is ready for the next battery
9.  

Battery Type Display