Vector Optics X-ACCU 30mm Dovetail Cantilever Adjustable Mounts (XASR-3065)
More adjustment. Better eye relief. Greater flexibility.
The X-ACCU Adjustable Cantilever Match Mounts are designed for shooters who have reached the limits of their scope's internal elevation adjustment while also needing greater flexibility when positioning their optic. Combining adjustable pitch with a cantilever design allows you to both maximise your scope's adjustment range and achieve the correct eye relief on rifles where rail space is limited.
By allowing the scope to be pitched forwards or backwards, these mounts reclaim valuable elevation travel for either extreme long-range shooting or very close-range zeroing. Pitching the scope down preserves more upward elevation adjustment for long-range shooting, while pitching the scope upwards can compensate for rifles fitted with built-in MOA rails or help optimise a setup for shorter-range shooting.
The cantilever design moves the scope mounting position forwards or rearwards, making these mounts ideal for rifles with limited receiver rail space, larger objective scopes or shooters who struggle to achieve a comfortable shooting position using conventional mounts.
Manufactured by X-ACCU, the premium mounting division of Vector Optics, these match-grade mounts are machined from 6061-T6 aluminium alloy to a higher standard than the entry-level VictOptics range. They provide excellent alignment, repeatability and rigidity, making them ideal for PCP air rifles, airsoft rifles and other low or zero recoil platforms.
For best performance, we strongly recommend installing these mounts using a calibrated torque screwdriver capable of 2-5Nm. Correct torque helps maintain zero, prevents movement during use and avoids damage caused by overtightening.
Specifications
- Fits Scope Tube: 30mm
- Rail Compatibility: 11mm Dovetail
- Adjustable Clearance (Mount to Bottom of Scope): 20-23mm (27mm when not offset)
- Adjustable Centre Height: 35-41mm
- Rear Offset Adjustment: 33-51mm
- Brace Width: 21mm
- Material: 6061-T6 Aluminium Alloy
- Finish: Matte Black
){kind=link}
Reviews
Scope mounts can be an emotive subject, and we can be forgiven for being cautious when choosing them. Well, these ones work. They are accurately engineered so they sit in line with the barrel... No windage problems due to bad engineering.
The advantage of adjustable elevation is it leaves the scope turret in its central position and thus doesn't distort the image.
Adjusting them for elevation is very straightforward and it locks solidly into place via four bolts.
Excellent value for money.
Couldn’t get the scope not to foul on the underside and against the nitrogen purge plug. Used the dremmel and got somewhere, but frustrated just went for shims on the original mount in the end.