BISLEY ONE - 300Bar 3-Stage PCP Air Pump

Affordable PCP filling without needing to buy a compressor.
 
The BISLEY Air Pump ONE is a straightforward, three-stage manual PCP air pump designed for shooters who want a low-cost way to fill their airgun without relying on mains electricity, a compressor or a dive bottle.
 
It offers a maximum working pressure of 300 bar and is suitable for topping up a wide range of PCP air rifles. It's compact enough to take to the range or shooting ground and, unlike an electric compressor, doesn't need anything more than a reasonably determined operator.
 
This is a budget manual pump, so it's worth setting expectations accordingly. Filling a PCP from low pressure to higher pressures requires physical effort, particularly as pressure increases. For occasional shooting, topping up between sessions or as a low-cost entry into PCP shooting, it offers a simple and accessible solution.
 
Three-Stage Pump Design
The Air Pump ONE uses a three-stage pumping system to generate the high pressures required by PCP airguns.
 
The pump uses stainless steel tubing and copper pistons, with a pressure gauge allowing you to monitor the pressure as you fill your rifle.
 
The supplied hose provides the connection between the pump and your rifle's filling system.
 
Compact PCP Filling
At approximately 60 x 16 x 7cm, the pump is reasonably compact for storage and transport.
It can be useful as a primary filling solution for occasional shooters or as a backup for those who normally rely on a compressor or air bottle.
 
As with any manual PCP pump, take your time and allow the pump to work at a steady pace. Trying to rush the process is a good way to turn a relatively simple job into an unnecessarily sweaty one.
 
Key Features
Affordable manual PCP filling solution
Three-stage high-pressure pump
Maximum working pressure: 300 bar
Stainless steel tubing
Copper piston construction
Integrated pressure gauge
56cm supplied hose
Compact design for storage and transport
No electricity required
Suitable for PCP airguns
Assembly required
 
Specifications
Maximum Working Pressure: 300 bar
Pump Type: 3-stage manual high-pressure pump
Construction: Stainless steel tubing and copper pistons
Dimensions: 60 x 16 x 7cm
Hose Length: 56cm
Hose Connection: Foster QD Only (includes foster QD adapter)
Approximate Packaged Weight: 2kg
 
Important Usage Information
Manual PCP pumps require physical effort, particularly when filling an airgun to higher pressures. Filling times will vary depending on the starting pressure, reservoir size, desired fill pressure and the person operating the pump.
 
The pump is intended for use with suitable PCP airguns and should only be operated within the pressure limits specified by both the pump and the airgun manufacturer.
 
Assembly is required before first use.