Precision lubrication where light, controlled movement matters.

SuperLube Synthetic Oil with Syncolon PTFE is a high-performance, low-viscosity lubricant designed for applications where parts need to move freely with minimal resistance. Reinforced with PTFE particles, it forms a durable lubricating film that reduces friction, wear, rust, and corrosion across a very wide temperature range.

This oil is ideal for fine mechanisms, sliding surfaces, seals, and moving parts where grease would be too heavy or restrictive. It clings to surfaces rather than running off, yet remains light enough to avoid drag or sluggish operation.

Shooting and airgun use

For the shooting industry, this oil is particularly well suited to CO₂ systems, PCP components, bolt actions, triggers, and seal lubrication. It is safe for nitrile, rubber, silicone seals, and will not cause swelling or degradation when used correctly. A small amount applied to O-rings, valve components, and moving interfaces helps extend service life and improve consistency.

It can also be used to lightly impregnate a microfiber cloth to apply a protective anti-corrosion film to steel parts such as barrels, breech blocks, and external metalwork.

The oil is fully compatible with metal, plastic, wood, leather, fabric, and painted surfaces, making it suitable for both mechanical and general-purpose use. It is also safe in environments where cross-contamination may occur, although degreasing parts before application is always recommended for best performance with PTFE-based lubricants.

This oil can be mixed with SuperLube Synthetic Grease to adjust viscosity for specific applications.

Use sparingly. A drop goes a long way.

Key Characteristics

• Fully synthetic oil reinforced with PTFE

• Reduces friction, wear, rust, and corrosion

• Very wide operating temperature range: -43°C to +232°C

• Does not degrade under hot, cold, or wet conditions

• Safe on rubber, plastics, and most elastomers

• Excellent oxidation resistance and mechanical stability

Specifications

• Contents: 7ml

• Lubricant type: Synthetic oil with Syncolon PTFE

• NSF / USDA H1 approved

• Non-toxic and environmentally safe

When to use which?

• Use the oil for seals, bolts, triggers, fine mechanisms, and low-resistance movement

• Use the grease for gears, linkages, rails, pivots, and parts under load

• Mix them if you need something in between