Pre-Fired Snowpeak Victory CP2 Pistol Carbine Kit (Lots of Extras)
A bit rough, a bit modular, and very much a known quantity. The Snowpeak CP2 has built a bit of a cult following over the years, not because it’s perfect, but because it’s simple, adaptable, and easy to tinker with.
This is a pistol/carbine kit, so you can switch between compact pistol setup and a longer carbine configuration depending on what you need. It’s not refined, it’s not fancy, but it’s flexible… and that’s the whole point.
This particular example has had some external mods, which is pretty standard for a CP2. Importantly, it hasn’t been messed with internally, so you’re not inheriting someone else’s questionable “tuning”.
What’s Included
- Long barrel for carbine setup (not fitted)
- Short pistol barrel and stock (fitted)
- 5x magazines
- Single shot tray
- Rear iron sights (not fitted)
- Barrel band bipod fixture clamp (fitted)
- VictOptics C3 Cerato 3-9x32 scope & mounts
- Nuprol premium roller hard case (custom foam)
- Reflex sight (not fitted)
- M10 to 1/2" UNF thread adaptor
- 1/2" UNF silencer
- Ammo bag
Condition – Grade D
- Heavy wear to block and magazine well
- Clearly well used
- Hard case has DIY pick-and-pluck foam (not professionally done)
- Fully functional
This one’s been used, modified, and generally lived with. It shows.
The Important Bit
As a pre-fired item, this pistol/carbine:
- Has been function tested
- Includes aftermarket parts and light external modifications
- Shows notable cosmetic wear from use
- Is sold as seen, with no warranty or returns
Final Word
If you want something clean and untouched, this isn’t even close.
If you want a cheap, flexible platform with a pile of extras and don’t mind a bit of wear… this is exactly the kind of CP2 people pick up to mess around with.
Important — read before purchase or storage.
All CO2 and green‑gas/propane powered guns and magazines are pressure systems and must not be stored pressurised for any length of time outside active shooting. Leaving gas installed will compress internal seals, accelerate permanent leaks, and shorten the life of your gun.
Temperature & Pressure Behaviour
CO2 and propane are temperature‑sensitive: they expand and contract with temperature changes. That expansion can force gas past worn seals or, in extreme heat, rupture seals or valves — creating dangerous failures. Keep guns and magazines out of direct sunlight and away from heat sources. Cold temperatures reduce pressure and can cause low power or feed problems, so always test a gas gun in the conditions you intend to use it.Always remove or fully vent gas after use. If you’re not shooting, remove the CO2 capsule or vent/empty magazines. Do not store with gas installed.
Lubrication Recommendations
To protect internals and seals we recommend using gas with added lubricants:-
CO2: use lubricated CO2 capsules — UMAREX branded CO2 is our recommendation.
-
Green Gas / Propane: use gas with added lubricant such as Vorsk, UltraAir, Nuprol, or Abbey (Green Gas).
Seal & Lubricant Guidance
-
Apply one drop of silicone oil (for polyurethane seals only — usually green or clear seals) to the tip of every 5 CO2 capsules or before long‑term storage to lubricate the piercing nozzle and protect seals.
-
For silicone seals (typically semi‑translucent white), only use PTFE‑based lubricants (e.g. Super Lube PTFE). Do not use silicone oil on silicone seals.
-
Never use gas cartridges showing rust or visible corrosion.
Leak Expectations & User Responsibility
All gas systems will slowly leak over time. Proper care reduces the rate of leakage but cannot prevent it entirely. Leaving cartridges installed dramatically speeds up seal wear. By using or storing gas guns you accept responsibility for regular maintenance, correct lubricant use, and safe storage.We Test Before Sale
We test every gas‑powered gun prior to dispatch or handover for major leaks and function. This may mean the gun arrives with gas installed — you may choose to use this free gas or vent the gun before storage. Testing does not guarantee seal life or prevent future leaks; seals remain consumable parts.If you’re unsure about seal types, lubricant compatibility, or safe storage, ask us before purchase — we’ll give honest guidance. Failure to follow these recommendations may void warranty or return eligibility where damage is caused by improper storage or lubrication.
-
){kind=link}